SKU: 58661438494

Street Pro Seitenschweller Ansatz + Flaps passend für Audi A5 Sportback F5 Facelift

$142.09 $157.88
Save 10%
No.2 Bestseller on lesnenettesduvin.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 12 - Jul 17

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Street Pro Seitenschweller Ansatz + Flaps passend für Audi A5 Sportback F5 FaceliftStreet Pro Seitenschweller Ansatz + Flaps passend fr Audi A5 Sportback F5 Facelift Flaps passend fr Audi A5 Sportback F5 Facelift. Einbauort: Exterieur. Fr einen stimmigen Look am Audi A5 Sportback F5 Facelift mit klarer Linienfhrung an der genannten Position. Highlights Passend fr Audi A5 Sportback F5 Facelift Sportliche Optik und stimmige Linienfhrung Montagematerial inklusive. Montage empfohlen Montage bei FLOW DOWN in Essen. Beschreibung Die Flaps

Street Pro Seitenschweller Ansatz + Flaps passend für Audi A5 Sportback F5 Facelift

Flaps passend für Audi A5 Sportback F5 Facelift. Einbauort: Exterieur.

Für einen stimmigen Look am Audi A5 Sportback F5 Facelift – mit klarer Linienführung an der genannten Position.

Highlights

  • Passend für Audi A5 Sportback F5 Facelift
  • Sportliche Optik und stimmige Linienführung
  • Montagematerial inklusive.
  • Montage empfohlen – Montage bei FLOW DOWN® in Essen.

Beschreibung

Die Flaps werden links/rechts am jeweiligen Anbaubereich montiert und setzen gezielte Akzente für eine schärfere Optik.

Bitte vergleiche die Fahrzeugangaben (Audi A5 Sportback F5 Facelift) mit deinem Fahrzeug, damit die Zuordnung passt.

Zulassung

Mit Teilegutachten – Eintragung nach §19(3) StVZO erforderlich.

FAQ

Passt das Teil sicher auf mein Fahrzeug?

Wenn dein Fahrzeug Audi A5 Sportback F5 Facelift ist (wie im Titel angegeben), ist die Passform darauf ausgelegt. Bitte gleiche Modell/Code im Titel 1:1 ab.

Wie läuft das mit der Eintragung ab?

Mit Teilegutachten – Eintragung nach §19(3) StVZO erforderlich.

Wie werden die Flaps montiert?

Die Montage erfolgt in der Regel mit den mitgelieferten Schrauben bzw. Befestigungsmaterial an den vorgesehenen Punkten am Fahrzeug.

Kann ich das mit anderen Aero-Teilen kombinieren?

In der Regel ja, sofern sich die Teile nicht gegenseitig behindern. Bei Kombinationen bitte Zulassung/Abnahme beachten.

Worauf muss ich bei bereits umgebauten Fahrzeugen achten?

Bei Umbauten (z. B. geänderte Stoßfänger/Schweller) kann die Ausgangsbasis abweichen. Bitte vorab prüfen, ob die Anbausituation identisch ist.

Wie pflege ich das Teil nach der Montage?

Reinigung mit mildem Shampoo und weichem Tuch. Aggressive Reiniger oder harte Bürsten vermeiden.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 58661438494

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 515 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Tharin
Lake Worth, US
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ. Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that. Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
H
Verified Purchase
Harvey
Fort Morgan, US
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
L
Verified Purchase
Lyrah
Dallas, US
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
A
Verified Purchase
Alexis
Natrona Heights, US
★★★★★ 5
Supports DP Alt + Power Delivery from one source
This is one of the very, very few USB-C hubs out there that successfully pushes DisplayPort Alt and 100w PD functionality from one source cable to one device. My monitor has a USB-C DP alt port that also pushes 95w PD and this hub successfully pushes both of those to my laptop, phone, and android handheld console. The marketing material says something about USB PD cannot work with DP alt, but it seems to be working fine for me so who knows. With this little hub in-between the link from the monitor to the device, I can now add a USB ethernet adapter and game controller, and I only ever have to plug one USB-C cable into my device (and I am using a USB4 extension cable with no issues as well) and it all works perfectly!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2026
M
Verified Purchase
Mark N.
Charlottesville, US
★★★★★ 5
Supports Reverse Charging a Laptop on Monitors with USB-C PD!
This adapter is unique in that it supports reverse charging + video on the same port. I use this with an LG monitor (60W PD) and an M1 Pro Mac. At first, I had connectivity issues: hub was disconnecting and reconnecting every few seconds. I followed advice to update the firmware on the hub, but that didn't solve the issue. Turns out, my monitor also needed a firmware update. Once I updated the monitor firmware, it stabilized and has been working great ever since.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 4, 2025

recommand products

Weidemann / Kramer Saugfilter 1000231484 orginales Ersatzteil
117.56
HP 207X Schwarz Toner – Original XL – 3'150 Seiten – für HP LaserJet Pro M255/M282/M283
142.46
Weidemann / Kramer Betriebsanleitung T5522 St.5 is 1000445501 orginales Ersatzteil
77.12
Weidemann / Kramer Flansch 1000089326 orginales Ersatzteil
280.00
Brother RJ3250WBL – Mobiler Thermodrucker, 76 mm, 127 mm/s, USB/LAN/WLAN/Bluetooth
361.24