AW Metpress PFG064 Gas Copper Press Fitting 65mm 90° Deg Elbow

AW Metpress PFG064 Gas Copper Press Fitting 65mm 90° Deg ElbowOverview AW Metpress 65mm 2" PFG064 gas copper press 90 degrees elbow DN65 crimp fitting is compatible with all popular press tools and their copper press systems such as Viega, Connex Banninger B Press and Kembla Kempress. This listing is for a single Metpress copper press 90 deg elbow. The AW 90 degrees press elbows are used extensively in all modern plumbing works, allowing a beautiful right angle finish and presentation. Along with the AW straight

Overview

AW Metpress 65mm 2½" PFG064 gas copper press 90° degrees elbow DN65 crimp fitting is compatible with all popular press tools and their copper press systems such as Viega, Connex Banninger B Press and Kembla Kempress. This listing is for a single Metpress copper press 90 deg elbow.

The AW  90° degrees press elbows are used extensively in all modern plumbing works, allowing a beautiful right-angle finish and presentation. Along with the AW straight couplings, these are the most common press fittings all plumbers must have. 

The AW Metpress gas copper press elbow features a lip at the end of the fitting. The lip helps align the actual press areas along the copper pipes and provide extra sealing material when pressed. The yellow sealing ring is made of HNBR O-ring for gas applications in both LPG and NG with a temperature range of -20 - 110 °C and a maximum pressure rating of 1600kP.

The AW Metpress copper press fittings have a slug fit over the copper pipes and will remain in place until the press tool is applied, allowing easy installations and adjustments. Once pressed and secured by the correct press tool, the fitting will not dent or deform the internal copper to ensure unhindered gas flow. These features have made the AW copper press systems a faster and safer connections to conventional compression or capillary systems. AW offers 25 years warranty on the Metpress copper press fittings. 

Technical Details

• Manufacturer: AW
• Size: DN65
• Specifications:
• Maximum Working Pressure: 1600 kPa
• Temperature Range: -20°C to 110°C
• Watermark certified for gas fittings
• Suitable for Australian AS1432 standard hard, half hard or annealed type A and B copper tubes 
• Materials:
• Copper
• HNBR O-ring 
• Features:
• Tamper free permanent joint
• No soldering required
• 25 years warranty on copper press fittings
• Fast and cost effective to install
• Intended Use: Joining gas copper pipes at 90 degrees
• SKU: PFG064

Package Contents

• Single AW Metpress PFG064 65mm 2" gas copper press 90 deg elbow
• Package Weight 700g