Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 14 - Jul 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
iFlight BLITZ Mini F7 Stack (55A ESC 4-in1 MPU6000) - 20x20mmThe next generation of Flight controllers and ESC's from iFlight have arrived. Currently being used in their BNF quads such as the Evoque BNF. These new flight controllers are equipped with a plug and play connectors making connecting your video transmitter, radio receiver, and other periphery sensors a breeze. They also make diagnosing issues in the field much easier with status indicator LED's that let you know in seconds if you are having a problem
The next generation of Flight controllers and ESC's from iFlight have arrived. Currently being used in their BNF quads such as the Evoque BNF. These new flight controllers are equipped with a plug and play connectors making connecting your video transmitter, radio receiver, and other periphery sensors a breeze. They also make diagnosing issues in the field much easier with status indicator LED's that let you know in seconds if you are having a problem with the 3.3V, 5V, or VBat. Coupled with IFlight's new 55 Amp BLHeli 32 Blitz 4-in-1 ESC, this stack can handle even the most amp hungry motors.
Check out all our 20x20mm Flight Controller/Stacks and the rest of our iFlight Products!
Top Features:
- Improved circuit design, better components and lower electrical noise!
- DJI HD VTX connector (plug-and-play / no soldering required)
- FC indicator LEDs for visual debugging
F7 FC Specifications:
- MCU: STM32 F722
- GYRO: MPU6000
- BAROMETER: NO
- OSD CHIP: AT7456
- FLASH: 16MB (BLACKBOX FLASH)
- UARTS: 6
- MOTOR OUTPUTS: 4X (SH1.0 CONNECTOR)
- I2C SERIAL: SDA / SLA PADS
- SMARTAUDIO / IRC TRAMP VTX PROTOCOL SUPPORTED
- LED CONTROLLER: YES
- BEEPER PAD: YES
- FIRMWARE TARGET: IFRC-IFLIGHT_BLITZ_F722
- MOUNT PATTERN: 20X20 MM / 4MM PCB HOLE DIAMETER, SILICON GROMMETS FOR M3 SCREWS
- DIMENSIONS: 30.5X27 MM
- WEIGHT: 5G
WIRING SUGGESTION:
- UART 1 FOR VTX HD / ANALOG
- UART 2 FOR A RECEIVER
- UART 3/4/5 FOR GPS OR OTHER SENSORS THAT REQUIRE A SERIAL PORT
- UART 6 FOR ESC TELEMETRY
TIPS
- F722 MCU HAS AN INNER INVERTER.
- SBUS, CRSF, ELRS, IBUS, DSM ETC... CAN BE CONNECTED TO ANY UNUSED UART_RX, WE SUGGEST YOU CONNECT TO UART_RX2
- FRSKY SMARTPORT, TRAMP & SMARTAUDIO CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX1
- F.PORT CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX2
ESC // BLITZ Mini E55 4-IN-1 2-6S ESC
55A ESC Specifications:
- DIMENSION: 35*42MM
- MOUNTING HOLES: 20*20MM/Φ4MM
- WEIGHT: 11.3G
- SUPPORTS 2-6S LIPO INPUT
- MCU： G071
- CONSTANT: 55 AMPS
- BURST: 60 AMPS
- CURRENT SENSOR: YES
- BEC: NO
- CURRENT RATE: 100
- SUPPORTS: DSHOT DSHOT150/300/600/MULTISHOT/ ONESHOT ETC.
- FIRMWARE: BLHELI 32
- TARGET: IFLIGHT_BLITZ_G1
Package Includes:
- 1pc x BLITZ Mini F7 Flight Controller
- 1pc x BLITZ Mini E55 4-IN-1 2-6S ESC
- 1set x silicon grommets
- 1set x wire harness for F7 Flight controller
Wiring Diagram ( Click the Image to open in Full Size )
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy