SKU: 88977746644

L4D390RICA - 3" Remodel Dedicated LED IC Airtight Housing - 14W - 120V

Sale price$12.54 Regular price$13.93
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

L4D390RICA - 3" Remodel Dedicated LED IC Airtight Housing - 14W - 120VPart Number: L4D390RICA 3" Remodel Dedicated LED IC Airtight Housing. Trims: MR16 LED Lamps or 3" LED Inserts. Sold Separately! Wattage 14w Voltage 120v Height 5 1 2" Length 11" Single Wall IC Airtight for use in insulated ceilings Housing adjusts in frame to accommodate up to 1 1 2" ceiling thickness Flicker Free LED Dimming; Dimmability based on lamp Trims and inserts sold separately 3 year factory warranty (limited) UL Listed for Damp Locations Wet

Part Number: L4D390RICA

3" Remodel Dedicated LED IC Airtight Housing.

Trims: MR16 LED Lamps or 3" LED Inserts. Sold Separately!

Wattage - 14w
Voltage - 120v

Height - 5 1/2"
Length - 11"

  • Single Wall IC Airtight for use in insulated ceilings
  • Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness
  • Flicker Free LED Dimming; Dimmability based on lamp
  • Trims and inserts sold separately
  • 3 year factory warranty (limited)
  • UL Listed for Damp Locations/Wet Locations with select trims
  • UL Listed for Direct Contact with insulation and Combustible materials
  • UL Listed for Feed Through
  • Airtight per ASTM E-283
  • Install a JA8-2016-E lamp/luminaire for Title 24 compliance
    Features

    • Construction/Installation
      ▪ Single Wall IC Rated for direct contact with insulation, for use in IC and non-IC conditions.
      ▪ Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness. Suitable for T-grid and drop ceiling applications.
      ▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
      ▪ Designed for ceiling plenums where 2x6 joists or taller are used. Stamped Galvanized steel frame.

      Electrical
      ▪ Input Voltage: 120VAC. Thermally protected against improper lamping.

      Dimmability
      ▪ Based on lamp selection

      Compatible Trims
      ▪ Compatible with - Designed for use with GU10 MR16 LED Lamps

      Listing
      ▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims, UL Listed for Feed Through
      ▪ Airtight per ASTM E-283. Install a JA8-2016-E Lamp/Luminaire for Title 24 Compliance
      ▪ UL Listed for Direct Contact with Insulation and Combustible Materials.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 88977746644

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 245 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
J. Lin
Lake Worth, US
★★★★★ 5
Polarity
Color: 6500K White, Size: 1Roll x 16.4ft, Color: 6500K White, Size: 1Roll x 16.4ft
I've been looking into various kits and components but this one seemed to fit my needs perfectly - all components included and the flexibility to cut strips (up to 6) to the lengths I needed. Its also very thin and needs no other mounting hardware, channels, diffusers, screws, etc. No instructions - but everything only fits together one way except which end of the LED strip to connect to (polarity). For my reel, it was towards the center of the reel and not the freed end - which meant I had to cut a piece off and connect the end that was just cut. Insert the cut end into the connect after peeling off a bit of the blue tape. You can also peel off a little bit of the white tape beneath that to expose the copper contacts - but the connector contacts can pierce that layer if you don't want to peel off the white layer also. (Don't peel it all off, just enough to to fit into the connector.) Insert the end, press down the hinged part until it clicks or is otherwise all the way clamped - don't need tools, just your fingers squeezing it is enough. Test the assembly by plugging it into the power supply. You can also connect the remote - a blue LED on the power supply tells you whether its on or off. Once I figured out which end to connect to, everything was quite straightforward. I installed my 6 strips in my small pantry - one for each shelf - and routed all the wires to one side, mostly hidden. I mounted the remote on the pantry door - it can sense through the door - which is not very thick - as well as just tapping it once the door is open. The remote can be touchless - just wave your hand near it - but it seems to also sense tapping from some objects. Holding down on the remote activates dimming - it will cycle through brightness and stop when you release. Other than that, its as simple as I had hoped and took me about an hour to install (I expect my next install will be 30 mins). I am planning to order more kits for other closets, kitchen, etc.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 29, 2024
A
Verified Purchase
Andrew B.
Cuba, US
★★★★★ 5
UPDATED: Replacement works great
Color: 3000K Warm, Size: 1Roll x 16.4ft
FINAL UPDATE: Seller shipped new power unit and it works great now. The lights are really great and super easy to cut to size and use. UPDATE 1: Seller got in touch and is sending replacement power unit. Will update again once it arrives. I do really like the look of these and they did wonders for a dark park of my closet that has built-ins. ORIGINAL: Lights stopped working after about 6 weeks (beyond the 30 day return policy). Seems like the control unit died. Haven’t found any feasible way to contact seller or manufacturer. Will update review if anything changes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 26, 2025
A
Verified Purchase
Aerdnua24
Houston, US
★★★★★ 4
Light it up!
Color: 3000K Warm, Size: 2Roll x 16.4ft, Color: 3000K Warm, Size: 2Roll x 16.4ft
I am very happy with these. They are easy to use. The only reason I am not giving a five star review is because the instructions and assembly weren’t the easiest. At first we could not get them to work. After looking through the reviews, one man told us that the -\+ were backwards and we tried what he suggested and they worked. I do suggest that because there are two light reels there should be two connecter boxes as well. We had to purchase two packages. Overall, We are satisfied with our purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2026
C
Verified Purchase
Chris
Los Angeles, US
★★★★★ 1
Quality just isn’t there
Color: 3000K Warm, Size: 2Roll x 16.4ft
Was very excited to receive this product because I had difficulty lighting op these LED strip lights, this looks like a package that had everything that I needed. First off, the strip lights themselves are very thin with wise and would look funny on my project, the adhesive backing did not stick at all once removed The touch sensor works great for about 10 minutes and then completely died, overall not impressed with the quality of this product, sending back
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 4, 2026
N
Verified Purchase
north80
Fort Morgan, US
★★★★★ 5
Excellent Cabinet Lights!
Color: 3000K Warm, Size: 1Roll x 16.4ft
Great cabinet lights. Easy to install and connect. The touch less control is handy and works well to dim and turn the lights on and off. Been using them for half a year now. No complaints.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 30, 2025

recommand products