MAD Wurks X4 26 1.6mm Carbon Fiber Rear Top Deck w/Wave (3 Holes) (1)

• (1) 1.6mm Carbon Fiber Rear Top Deck w/Wave (3 Holes)

• 1.6mm rear top deck with wave brace
• 3 holes for max rear top deck tuning
  
• 3rd hole recessed further than the front 2 in order to use the factory screws
• Wave allows slightly more flex than full stiff brace top decks

Tuning:

• Using the 1st and 2nd top deck holes for the stiff rear setting typically feels like the car can't decide if it wants to roll mid corner under load or remain flatter.  This results in an unstable feeling on entry to mid corner.
• Running the 1st and 3rd holes together eliminates the inconsistent feel of running the stock 1st and 2nd screws in the rear.
• For max rear stability use the 1st and 3rd hole in the top deck
• If running 1st and 3rd top deck holes feels good, but the rear stays too flat add another rear motor mount screw.  For example if you typically run screws 2 and 3 on the motor mount, try running 2, 3, and 4 to add a little more roll to the rear of the car.