Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Matek ELRS-R24-D 2.4Ghz ReceiverSpecifications Brand Name: MATEKSYS Item Name: ELRS R24 D RC Receiver Model: ELRS R24 D Weight: 3g (with 2x antennas) PCB Size: 21x15mm ESP8285, SX1280IMLTRT PA LNA: SE2431L Antenna connector: IPEX MHF 1 RF Frequency: 2. 4GHz (2400~2480MHz) Telemetry power: 22. 5dbm~23dbm SE2431L RX_gain: 12. 5dB Diversity (antenna switching), default ANT2 Receiver protocol: CRSF Input voltage: 4~9V DC @ 5V pad Power dissipation: 40~45mA(before binding),
Specifications
- Brand Name: MATEKSYS
- Item Name: ELRS-R24-D RC Receiver
- Model: ELRS-R24-D
- Weight: 3g (with 2x antennas)
- PCB Size: 21x15mm
- ESP8285, SX1280IMLTRT
- PA/LNA: SE2431L
- Antenna connector: IPEX MHF 1
- RF Frequency: 2.4GHz (2400~2480MHz)
- Telemetry power: 22.5dbm~23dbm
- SE2431L RX_gain: 12.5dB
- Diversity (antenna-switching), default ANT2
- Receiver protocol: CRSF
- Input voltage: 4~9V DC @ 5V pad
- Power dissipation: 40~45mA(before binding), 70~75mA(binding), 90~95mA(wifi mode)
Firmware Information:
- ExpressLRS MATEK_2400_RX
- Firmware update via UART or WIFI
- ELRS-R24-D: enable "USE_DIVERSITY" (checked) when flashing in ExpressLRS configurator
Notes
"Any ELRS 2.4Ghz receivers can work with any ELRS 2.4Ghz TX Modules, from any manufacturer and even the DIY ones. This is as long as they have the same binding phrase and configuration options (Regulatory Domain, Performance Options and Extra Data)."
More details about ExpressLRS, pls check out the official ExpressLRS wiki
Wiring with FC
Receiver RX — FC UART_TX for Telemetry
Receiver TX — FC UART_RX for Control
Receiver 5V — FC 5V or 4v5
Receiver G — FC GND
Receiver protocol: Serial-based receiver - CRSF
Traditional Binding
Receivers have ExpressLRS fw V1.1.0 preloaded without BINDING_PHRASE
1. Power on and off your receiver three times
2. Make sure the LED is doing a quick double blink, which indicates the receiver is in bind mode
3. Use the [BIND] button on the Transmitter Lua script, which sends out a binding pulse
4. Receiver will switch to slow blink once it has received binding pulse.
5. Power off and power on receiver again. If the receiver LED switch to solid on from slow blink, it's bound with your transmitter.
Important
If the RX firmware has a bind phrase, the RX will never enter binding mode using the above procedure. It must be flashed without a binding phrase to do traditional binding.
Flashing with ESP_NodeMCU-PyFlasher
1. Connect receiver to USB-TTL module(RX-TX, TX-RX, 5V-5V, G-GND)
2. Connect USB to PC while pressing and holding the boot button in.
3. Open ESP_NodeMCU-PyFlasher
4. Select Serial port of USB-TTL module, load firmware, select "Dual Output(DOUT)" and "Yes.wipes all data"
5. Click "Flash NodeMCU"
6. After flashing, Power off and power on your receiver, receiver will enter binding mode(quick double blink).
Flashing with ELRS configurator
- MATEK_2400_RX target is not available in ELRS configurator 1.0.8 and fw release 1.1.0 for now
Included
- 1 x ELRS-R24-D RC Receiver
- 2 x IPEX MHF1 Antennas
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy