Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Holley EFI Terminator X Max Stealth 4150 - GM LS Engines 550-1064Black 58X Crank Trans Control 650 HP 3. 5 in. Touchscreen Features: Terminator X Stealth 4150 Kits for either 24x or 58x LS engines Supports up to 650HP with Four 100lb. hr. Injectors Terminator X Max kits provide plug and play Transmission control for GM Transmissions Internal 1bar MAP sensor, built into the Terminator X ECU. All of the wiring exits below the fuel injector bowls, for a completely stealth installation Air entry machined to fit most
Black - 58X Crank - Trans Control - 650 HP - 3.5 in. Touchscreen
Features:
- Terminator X Stealth 4150 Kits for either 24x or 58x LS engines
- Supports up to 650HP with Four 100lb./hr. Injectors
- Terminator X Max kits provide plug and play Transmission control for GM Transmissions
- Internal 1bar MAP sensor, built into the Terminator X ECU.
- All of the wiring exits below the fuel injector bowls, for a completely stealth installation
- Air entry machined to fit most stock style air cleaners with air cleaner locator provisions
- External fuel pressure regulator required, set to a base pressure of 58.5 PSI, such as 12-886
- Integrated ignition timing control ?"Plug and play with factory LS coil sub harness and OEM LS coils ?" no external boxes/modules needed to run Coil Near Plug
- High Resolution Full Color Touchscreen for Initial Setup, Tuning, and Gauge Displays
- Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!) - NO laptop required!
- Self-tuning ECU means you don’t have to be a computer/tuning wiz to have EFI!
- Self-tuning ECU means you don?™t have to be a computer/tuning wiz to have EFI!
- 4 Inputs ?" 12v, Ground, 5v, and Frequency, for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure Inputs are pre-terminated)
- 4 Outputs ?" Ground, PWM - , for accessories such as; fans, boost control, nitrous control, IAC Kit, and More
- The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides real-time Fuel Map Learn!
- OEM Style TPS/IAC, for years of dependable service
- Available in 3 finishes: Shiny, Black and Gold
- Compatible with Holley EFI digital dashes, gauges and fuel system accessories
Specs:
| Accelerometer Support | Yes |
|---|---|
| Boost Control | Yes |
| Brand | Holley EFI |
| CAN-BUS Support | Yes |
| CFM | 950 |
| Coil Per Cylinder Ignition Support | Yes |
| Color | Black |
| Crank Reluctor | 58x |
| Datalogging Support | Yes |
| Distributor Included | No |
| Dry Nitrous Control | Yes |
| e85 Support | No |
| EGT Support | Yes |
| Emission Code | 3 |
| Finish | Black |
| Flange Size | 4150 |
| Flange Style | Squarebore |
| Forced Induction Support | Yes |
| Fuel Filter Included | No |
| Fuel Hose Included | No |
| Fuel Injectors Included | Yes |
| Fuel Pressure | 58.5 PSI |
| Fuel Pressure Regulator Included | No |
| Grade Type | Performance |
| Handheld Included | Yes |
| Ignition Timing Control | Yes |
| Ignition Type | GM LS 58x |
| Individual Cylinder Fuel Corrections | No |
| Injector Size | 100 lb/hr @ 58.5 PSI |
| Inlet / Outlet Size | 6AN |
| Intake Manifold Included | No |
| Knock Retard Support | Yes |
| MAP Sensor | 1bar |
| Max Horsepower Rating | 650 |
| Multi-Stage Nitrous Control | Yes |
| Product Type | EFI System |
| Progressive Nitrous Control | Yes |
| Sale Category | Air and Fuel Delivery |
| Self-Tuning | Yes |
| Terminator LS Options | Fuel, Spark, Transmission |
| Throttle Bore | 1.75 in. |
| Throttle Position Sensor Included | Yes |
| Transmission | 4L60E/4L80E |
| User-Tuneable | Yes |
| Warning | California Proposition 65 |
Application:
| Year | Make | Model | Submodel |
|---|---|---|---|
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 1543 reviews
Sort
Product Reviews
★★★★★ 5
Excellent Sound Deadening Material!
Style: 10 SqFt, Style: 10 SqFt
I installed Kilmat Sound Deadening in my truck, and I’m extremely impressed with the results. The material is thick, pliable, and easy to cut to fit doors, floor panels. It sticks very well to metal surfaces and doesn’t peel, even after heating it slightly to make it more flexible. After installation, I immediately noticed a reduction in road noise and vibrations. Worth the money!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2026
★★★★★ 5
A Must Have For Car Restorations!
Style: 80 mil 36 sqft, Style: 80 mil 36 sqft
I have been installing this matting in my 74 Datsun 260Z restore and very pleased with the ease of application and overall quality. My car has bedliner coating inside and this stuff sticks extremely well and is easy to trim and shape as well. I have just started installing it and using the rollers to work it in place but I can already tell a difference with just the little bit I have added....has reduced the resonance in the metal already. It's not a fast process but know it will be very rewarding once complete.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
★★★★★ 5
Makes For Quiet Rides
Model: 10 SqFt(0.95 SqM)
Comparable quality and performance to name brand competitor. It sticks on strong, easy to apply, and does make a difference in sound reduction. Turn your hollow shell sounding vehicle panels into solid sounding walls.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 15, 2026
★★★★★ 5
Must for subwoofers. True 2mm spec. High quality.
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
Let me start of by saying WOW! This made a huge difference in the SQ of my L7S pushing 930w rms. Before I had major rattles in my 2020 Honda Civic SI. Taking the time to do this to my trunk and Lid made me realize just how loud my subwoofer actually is. It literally eliminated the rattles throughout my whole car. I still plan on doing this to my doors and rear deck but once I upgrade the speakers. I still have half of the box just doing the trunk and lid so 1 box of 36sf will be enough for most of the areas that need to get done. You may need a little more overall. This is true 2mm spec. Very sticky and easy to apply. It just take time to finish the work correctly and roll it down. It is not as heavy as I thought it was going to be. The size of the sheets are perfect for what you need to do. The value is on point for the quality. It does not rip very easily but you can cut it to size without any problems. Again, This is a must buy for anyone who is pushing 1000w rms or more.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
★★★★★ 5
Quality product you
Model: 18 SqFt(1.7 SqM), Model: 18 SqFt(1.7 SqM)
Summary: Great quality product, priced right. Cuts and installs easy-follow the instructions people!! PRO TIP-you don’t need to cover every square inch. OVERKILL!! Think about it-when a bell rings you could put your fingers on the edge and silence it right? Same rules apply here. A strip or square will isolate the vibration and notice when placed correctly— knock on the surface and see what vibrates or what part makes the loudest drowning and that’s a good clue of where you should put a piece of this…unless you’re trying to use it for temperature insulation no need to go ape on it. If you look at the bottom of a stainless steel sink, it’s got a stripe or a small sticker of insulation that keeps it from rattling. You can do that here. What’s important to note is the instruction specifically say use a roller to roll the ribs out until it’s smooth that way you’ve got maximum adhesion. I see a lot of pictures and videos from people that finished their install and didn’t follow this simple instruction. It makes sure that it’s stuck down before you put all your paneling and carpet back in and it’s a small step with a cheap wooden roller it’s easy. I’ll say the installation with this product is a breeze. You can use sharp scissors or a blade. It does get gummy after a while, and you may need to clean off your blade or your scissors, but it cuts very well and the ribs make it easy to size in space the thickness is fantastic and the backing paper comes off quite easily. I’ve done lots of installations with Graphics emblems you name it and this product is very easy to use and represents good value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026