Navpod Gp1040-34 Systempod For Simrad Nss9 Evo3
SKU: 48168844626

Navpod Gp1040-34 Systempod For Simrad Nss9 Evo3

$192.69 $214.10
Save 10%
No.2 Bestseller on lesnenettesduvin.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Navpod Gp1040-34 Systempod For Simrad Nss9 Evo3Navpod GP104034 SystemPod Model: GP1040 34 SystemPod Pre Cut for Garmin GPSMAP 1042xsv 1022xsv 1022 and 1 inst. (3. 6? hole) for 9. 5? wide guard SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it? when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and

Navpod GP104034 SystemPod

Model: GP1040-34
  • SystemPod Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 and 1 inst. (3.6? hole) for 9.5? wide guard

SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.

This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit.

Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!

Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

Specifications
Overhall
Height 9.5
Width 20.25
Depth 6
Usable Face
Height 7.375
Width 17.5
Depth 5
Max Cutout
Height 7
Width 17
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 48168844626

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 307 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Anonymous
Cuba, US
★★★★★ 3
Cheaply made but functional
Color: Black
Pros: The headrest is highly adjustable. Even if you're tall you'll likely be able to tilt it so that you can rest your head on it while reclining. The instructions for putting it together are easy to follow. It's perfectly serviceable as a desk chair with no glaring defects. The mesh material keeps your body cool and dry even when sitting in it all day. Cons It's obviously very lightweight and cheaply made. This does make the chair easier to move, but this doesn't really feel like a $180 chair at all. More like a $120 or even $100 chair. The chair back is attached to the chair seat by a plastic bracket. Nearly every desk chair I've had in the past has had their back attached to the bottom with a metal bracket, and even those start to bend out of shape after a year or so. While reclining a good portion of your weight will be resting on this plastic bracket, and I simply cannot see this cheap plastic lasting for very long supporting anyone's body weight over a long period of time. If you buy this chair, make sure to get the warranty. The armrests are closer together than on most chairs, which creates a claustrophobic feeling of being squeezed by them. You get used to it eventually, and you can just put the armrests up if you want to, but a way to adjust the armrest width would have been nice. The lumbar support doesn't really do anything at all. It only presses against my back at the most intense setting, and even then not very much. There is no incremental recline setting. Either you are fully reclined, or sitting fully upright. Luckily the full recline setting is about perfect for me, but for a $180 chair you'd expect a bit more settings here.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
K
Verified Purchase
Kindle Customer
Alexandria, US
★★★★★ 5
Great Chair
Color: Black
Very comfortable chair! I’m a big guy - 6’ 2”, 285 lbs. and it fits me perfectly. The head rest is a nice touch and I appreciate it more than I thought I would. Lumbar support is in just the right position and is adjustable (more support vs. less support). It does adjust up and down but not very much. Was also super simple to put together although I did have to crank on the screws that attach the back of the arm rest to the back of the chair. If you’re looking for a place to plant your butt for 8 hours, this is your chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026
A
Verified Purchase
Arne R. Guerra
Houston, US
★★★★★ 5
Great product
Color: Dark Black
Easy to assemble and very good quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
M
Verified Purchase
M. P*****k
New York, US
★★★★★ 1
DO NOT BUY! DO NOT BUY! DO NOT BUY!
Color: Black, Color: Black
Absolute garbage chair. Only had for six month and the mesh on the seat has already come apart after using it for my home office. Chair was squaking after only three months and now I can't even sit in it cause it sags. Can't even get my money back for this cheap garbage.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026
C
Verified Purchase
Country Doug
Louisville, US
★★★★★ 5
Very comfortable with good lower-back support
Most comfortable, well made, easy assembly office-gaming chair (very pleased)! *I suggest, HOLD-OFF popping the seat onto the upper-cylinder until AFTER assembling the back-rest onto the seat/arm-seat with back-rest as a unit...can then be popped onto the upper gas-cylinder(Much more stable than fighting with chair freely rolling and turning) while attempting to aligning the holes assembling the back-rest. Afterwards the seat with back-rest assembled can easily be popped onto to the upper-end of the gas-cylinder and we are good to go! * do pay attention to using the correct bubble-packed bolts for each assembly, as directed * all the holes align -up very precisely... so if screwing in the bolt(s) and after a couple-turns it gets hard-to-turn, we are 'cross-threading the bolt into the threaded hole...so back-out and realign the bolt as so it threads in very easy. * the bubble-pack of bolts are clearly labeled so as we easily know which ones go where. *0ne bubble-packet even includes a spare group just in case we lost one (like out in the grass-lawn)? * Included a T-handle alien-head wrench (all needed for total assembly) very nice for having around if any re-tightening needed. all speaks Quality! >>> Been using about a month now...And I REALLY like this office gaming chair _ very comfortable cushioned well and excellent lower-back support _ the faux-leather seems to be more thick and durable and stitching is NOT ripping-out (as my previous & more expensive chair had done with it's paper-thin faux leather) _ easy assembled chair seems very sturdy and solid, (yet light weight), in moving around, (not some wobbly contraption as my previous more expensive chair). _ a strong Five-Star rating!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 14, 2025

recommand products

1987 Dr. Kailas Nath Katju FDC
48.00
Oriental Classis White Coffee 38g x 10
18.90
Chobani Strawberry Yogurt 160g
11.50
Durbanville Hills Sauvignon Blanc Wine 750ml
84.90
Cloudy Bay Pinot Noir 750ml
172.99