Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Rear Wheel Bearing Kit for Mitsubishi Outlander, Citroen C4, Jeep Compass - PQ951Vehicle Fitment & Part Details This rear wheel bearing kit is listed for the Mitsubishi Outlander (07 14), 4x4. The wheel bearing supports smooth wheel hub rotation. Confirm compatibility by matching the listed fitment details. Verify VIN engine. Key Details SKU PQ951 Component Rear Wheel Bearing Kit Position Rear Configuration Kit (covers one wheel) Drivetrain 4x4 Primary Fitment Mitsubishi Outlander (07 14) Dimensions 25 mm inner diameter, 73. 9 mm
Vehicle Fitment & Part Details
This rear wheel bearing kit is listed for the Mitsubishi Outlander (07-14), 4x4. The wheel bearing supports smooth wheel hub rotation. Confirm compatibility by matching the listed fitment details. Verify VIN/engine.
Key Details
- SKU
- PQ951
- Component
- Rear Wheel Bearing Kit
- Position
- Rear
- Configuration
- Kit (covers one wheel)
- Drivetrain
- 4x4
- Primary Fitment
- Mitsubishi Outlander (07-14)
- Dimensions
- 25 mm inner diameter, 73.9 mm outer diameter, 60.5 mm height
- OEM References
- 16 062 918 80, K05105770AC, K05105770AD, K05105770AH, 3785A009, 3785A086, 16 736 046 80
Product Specifications
| Specification | Value |
|---|---|
| Inner Diameter | 25 mm |
| Outer Diameter | 73.9 mm |
| Height | 60.5 mm |
| Flange Diameter | 140.5 mm |
| Disc Diameter / Gear Teeth | 67 mm |
| Bolt Pattern (PCD) | 5X114 |
| Mounting Holes | 4 |
| Wheel Studs | 5 |
| Spline Count | 25 |
Vehicle Fitment
Includes 4 supplied applications covering Citroen, Jeep, Mitsubishi. Use the full table below to confirm model, engine option and year range before ordering.
| Make | Model / Application | Year Range |
|---|---|---|
| Citroen | C4 Aircross 1.6 VTi EP6C, 1.6 e-Hdi, 2.0i Aircross 4B11 | 10-15 |
| Jeep | Compass 2.0 ECN, 2.4 ED3, ERZ | 2007- |
| Jeep | Patriot 2.0CRD ECD, ECE, 2.4 ED3 | 2007- |
| Mitsubishi | Outlander 2.4 4B12 | 07-14 |
Fitment Notes
- Always match the listed vehicle details before ordering. Verify VIN/engine.
- Open-ended dates (e.g. "2002-") reflect supplier catalogue data and must be confirmed against the vehicle before ordering.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, OE reference and original part comparison before ordering.
- Confirm your ABS type (ABS / non-ABS / ASB / encoder ring) before ordering - the wrong ABS variant will not function correctly.
- Match the supplied dimensions to your original bearing: 25 mm inner diameter, 73.9 mm outer diameter, 60.5 mm height.
- This kit covers one wheel; order two for a full axle.
- Confirm the drivetrain (4x4) matches your vehicle.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will this rear wheel bearing kit fit my Mitsubishi?
This part (PQ951) is listed for the fitments shown on this page. Confirm by matching the fitment details and your original part. Verify VIN/engine.
Does this cover one wheel or both?
This kit covers one wheel. Order two if you are replacing both sides of the axle.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 765 reviews
Sort
Product Reviews
★★★★★ 5
Love these shelves!
Size: 48inch, Color: Light Walnut
These are incredible for the price! Feel & look like wood. Easy-ish to install - just take your time, measure twice & use a level. Very sturdy! Great hardware & instructions. Now my daughter wants some for her apt.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2025
★★★★★ 5
Perfect!
Size: 24inch, Color: Walnut, Size: 24inch, Color: Walnut
Perfect! Just what I wanted. Sturdy, came with all the pieces, and very pretty wood.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 20, 2025
★★★★★ 3
They worked for replacing shelves but I wouldn’t mount them on my wall
Size: 24inch, Color: Walnut
I specifically bought these shelves because of their dimensions. I have a built-in cabinet and when we moved in 6 or so years ago, the previous owners must have taken them with them when they moved. It’s been bothering me the whole time I’ve lived here and wanted to make some but just never found the time to get around to it. I measured them out and these floating shelves were perfect for the dimensions I needed to replace the missing shelves. Would I put these on my wall(s)? Absolutely not unless I corrected the mounting issues. One thing that really stuck out to me was how bad the design was for mounting these shelves. When I took them out of the packaging, the brackets were falling out of the back everywhere. This did not inspire too much confidence that if I hung them up, they would be stable. I’ve had a ton of floating shelves similar to this mounting design, but the arms that the boards slide into on the wall for this particular shelving are thin and flat (while being easily mailable with your hand alone) in comparison to every other one I’ve had being round, or at least decently thick, sometimes with additional screws that you can insert under the board and into the mounting arms for extra stability. Also, any time I’ve ever had to mount a similar floating shelf, it took some finesse and strength to release the mounting arms from the back of the shelf because they fit very snugly. The fact that the mounting brackets were falling out of the back means that they are not snug and prone to be very loose. Another thing that stuck out to me is that the shelves are hollow. Now, for my purposes, this is fine, but again, detracts significantly from the confidence that these would be stable if mounted on the wall and would most likely droop when weight was applied. I also took issue with the fact the boards had no protective covering and were jammed into a box, with the hardware pressing against one of the boards tightly. I just flipped the shelf over to mask the defect from packaging but the side I wanted to use because it had better coloring was the damaged side. Mine did not come with any mounting directions but some common sense would be all you needed to put up something so simple. However, it did not come with a template to mark the wall for spacing, which adds to the difficulty because you have to have precise DIY measurements to slide the boards onto the mounting arms correctly. To be honest, if I were to mount these, I would bypass the shoddy mounting provided and go with some heavy, durable brackets underneath. Overall, these shelves worked for my purposes but I can see how the reviews would be very mixed in terms of mounting and quality. I did get these on a limited time deal and they were priced at approximately $8 per shelf, which was a really good deal to get 4 shelves for that price in comparison to the “normal” price resulting in approximately $11/shelf. I wouldn’t have paid full price for these and would have been highly disappointed had I with the intention to mount them, especially since I would have needed to provide better and more stable mounting hardware. They are lesser quality than others within the same price range and I think you could do much better if your intention is to mount them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2025
★★★★★ 5
Would purchase again
Size: 48inch, Color: Light Walnut
I was not sure what to expect when I purchased these. I thought maybe they were going to be a fake particle board. But this was a solid wood. Easy to install, no directions were in the box. There was a few chips in the corner of the wood but overall I would purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2026
★★★★★ 5
Love these and will be getting more. Very pretty.
Color: Oak, Size: 39.4"L x 8"D, Set of 2, Color: Oak, Size: 39.4"L x 8"D, Set of 2
Very nice shelves they look great up and were easy to install. Same color shown in picture. They seem very sturdy on the wall and I love the look of them. They are light weight and a good size just a little plunder 40 inches. Good quality for the price. I'll be buying again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 25, 2026
recommand products
HHA Bow Sight King Pin Tapes Replacement Tape Kit for All KP Series - Open Box
13.95
SAS Back Arrow Quiver Hunting Target with Two Front Pockets Black LH - Used
23.95
Ravin R10 Crossbow Package R014 Predator Camo Older Model - Used
18969.00
Carter Insatiable 3 Release - 3 Finger Release
181.00
Zebra Technologies ZQ51-AUE0010-00 Series ZQ510 Mobile Printer, 3" Print Width
300.00