Draper Bandsaw, 228mm, 300W 98446

Draper Bandsaw, 228mm, 300W 98446Bench mounted bandsaw built to a high specification and ideal for trade professionals. Designed to cut wood, wood derived materials and plastics. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0 45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No volt release switch prevents uncontrolled blade to re start after power

Bench mounted bandsaw built to a high specification and ideal for trade professionals. Designed to cut wood, wood derived materials and plastics. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. Supplied with 10tpi blade, parallel rip fence and other accessories.

Contents

1 x 10tpi blade
1 x Parallel rip fence
1 x Open ended spanner
1 x Push stick
1 x Hex key

Specifications

Voltage: 230V
Frequency: 50Hz
Input: 300W
No load speed: 1400rpm
Maximum throat capacity: 228mm
Cutting depth: 90mm
Maximum capacity: 125mm
Cutting speed: 10.6m/sec (635m/min)
Table size: 300 x 300mm (Tilt to 45 degrees)
Bandsaw dimensions: 510 x 370 x 755mm
Weight: 19kg