Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 14 - Jul 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
SUPERSONIC PARTS spuithouder kitBeide handen vrij tijdens het ontluchten SUPERSONIC PARTS Spuithouder Kit De SUPERSONIC PARTS Spuithouder Kit houdt je ontluchtingsspuit stabiel en betrouwbaar op zijn plek. Je bevestigt de houder eenvoudig aan het frame, stuur of de verende voorvork van de fiets, zodat je beide handen volledig vrij hebt voor het nauwkeurige ontluchtingswerk. Geen vallende spuiten en geen gemorste remvloeistof meer op je vloer of werkbank. De kit is universeel
Beide handen vrij tijdens het ontluchten – SUPERSONIC PARTS Spuithouder Kit
De SUPERSONIC PARTS Spuithouder Kit houdt je ontluchtingsspuit stabiel en betrouwbaar op zijn plek. Je bevestigt de houder eenvoudig aan het frame, stuur of de verende voorvork van de fiets, zodat je beide handen volledig vrij hebt voor het nauwkeurige ontluchtingswerk. Geen vallende spuiten en geen gemorste remvloeistof meer op je vloer of werkbank. De kit is universeel compatibel met alle gangbare ontluchtingsspuiten.
Waarom de SUPERSONIC PARTS Spuithouder Kit?
- Beide handen volledig vrij: Focus je 100% op het ontluchtingsproces zonder dat je constant een spuit hoeft vast te houden.
- Universele buisbevestiging: Past op vrijwel elk frame, stuur of voorvork dankzij de twee houderformaten en vijf flexibele rubberen straps.
- Groot en klein montageblok: Het kleine blok is ideaal voor smalle buizen (stuur, achtervork); het grote blok is perfect voor bredere buizen (voorvork, dikke framebuizen).
- Stabiel en trillingsvrij: De spuit blijft rotsvast op zijn plek zitten, ook tijdens het pompen of het tikken tegen de remleidingen om luchtbellen te lossen.
- Brede compatibiliteit: Uitstekend geschikt voor zowel universele werkplaatsspuiten als standaardspuiten uit ontluchtingssets.
- Compleet geleverd: Direct klaar voor gebruik inclusief 2 houders en 5 rubberen straps voor elke denkbare bevestigingssituatie.
Specificaties
| Merk | SUPERSONIC PARTS |
| Type | Spuithouder kit / Bleedtool helper |
| Bevestigingslocaties | Frame, stuur, verende voorvork |
| Compatibiliteit | Alle gangbare ontluchtingsspuiten |
| Toepassing | Hydraulische remmen (Shimano, SRAM, Magura, TRP, Tektro) |
| Inhoud verpakking | 2 houders, 5 rubberen straps |
Inhoud van de verpakking
- 1x Klein bevestigingsblok (voor stuur, stuurpen en smallere framebuizen)
- 1x Groot bevestigingsblok (voor de verende voorvork en brede framebuizen)
- 2x Lange elastische bevestigingsrubbers
- 2x Korte elastische bevestigingsrubbers
- 1x Extra reserve bevestigingsrubber
Montage
- Kies het juiste bevestigingsblok: gebruik het kleine blok voor het stuur of frame en het grote blok voor de voorvorkpoten.
- Klem of schuif je ontluchtingsspuit stevig in de opening van het gekozen bevestigingsblok.
- Plaats het blok tegen de fietsbuis en zet het stevig vast met de meegeleverde rubberen strap.
- Controleer handmatig of de spuit stabiel en rechtop vastzit voordat je begint met het vullen of ontluchten van het remsysteem.
Veelgestelde vragen
Kan ik deze spuithouder veilig gebruiken op een carbon frame of stuur?
Ja, absoluut. De bevestigingsblokken en de meegeleverde straps zijn gemaakt van zacht, flexibel rubber. Dit materiaal is 100% veilig voor carbon frames en sturen en laat geen krassen of doffe plekken achter. Zorg er wel voor dat de buis vooraf even stof- en zandvrij is gemaakt.
Welke ontluchtingsspuiten passen er exact in deze houders?
De houders zijn flexibel ontworpen en daardoor compatibel met vrijwel alle gangbare ontluchtingsspuiten op de markt. Ze sluiten onder andere naadloos aan op de SUPERSONIC PARTS ontluchtingsspuit.
Waarom zitten er twee verschillende houders in de kit?
Dit biedt maximale flexibiliteit. Bij een uitgebreide onderhoudsbeurt gebruik je vaak één spuit bij de remklauw (onder) en één spuit bij de remhendel (boven). Met de twee meegeleverde formaten houders kun je beide spuiten gelijktijdig op de juiste buisdiameters fixeren voor maximaal werkcomfort.
Is deze houder ook geschikt om de ontluchtingstrechter in vast te zetten?
Nee, deze kit is specifiek gevormd voor ronde ontluchtingsspuiten en is niet geschikt voor trechters. Gelukkig is de SUPERSONIC PARTS trechter standaard al voorzien van een eigen stabiele werkstandaard om deze tussentijds netjes weg te kunnen zetten.
Zijn de rubberen straps los te vervangen bij eventueel verlies of slijtage?
Ja. De meegeleverde straps hebben een universele maatvoering en sluiting. Mocht er onverhoopt eentje knappen of kwijtraken, dan zijn vergelijkbare rubberen snelbinders of montagestrips eenvoudig verkrijgbaar in de fietshandel of online. Twijfel je of je de juiste maat vindt? Neem gerust contact met ons op.
Bekijk ook de andere SUPERSONIC PARTS producten bij BikerGadgets.
Bestel de SUPERSONIC PARTS Spuithouder Kit vandaag nog bij BikerGadgets en ontlucht je hydraulische remmen voortaan sneller, schoner en met beide handen vrij.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 2205 reviews
Sort
Product Reviews
★★★★★ 5
Good buy
Color: Navy Blue, Size: Body（20"X 54"）
Nice and soft , well packaged and looks good. Kinda pillowcase you find in a luxury hotel
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 5
Silky and Soothing
Color: Cream, Size: 2 Pack Queen（20"X 30"）
I thought I was getting 1 of the queen sized but I got 2. I got these for my Pomeranian's fuzzy pillow. He's always hot and these are very cooling and very good quality. He loves them and are very comfortable for him. They totally transformed his shaggy old pillow. I used the larger body pillow covers to replace the covers I had. They matched my bedspread perfectly. I use 2 body pillows along the exterior wall in my bedroom where there is cold coming through the floor in the winter. I'm sure I will enjoy them in the summer when it's hot too!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2026
★★★★★ 5
super smooth, silky, stays comfortable feeling. DO NOT DRY or wash with heat
Color: Blue, Size: Queen (U.S. Standard), Set name: Stretchy and Soft, Color: Blue, Size: Queen (U.S. Standard), Set name: Stretchy and Soft
I'm impressed. I have used cooling pillow cases before, and found them effective, but the cooling material have always been on just one side. These are 100% cooling material. The material is super smooth and silky feeling. It is great feeling against hair and skin (even better than my old polyester satin I was using before cooling pillowcases). The material is cool, and does not seem to get hot hot. The pillow cases are super stretchy with a small hidden zipper. They grab onto the pillow and dont loosen up. Makes my pillow look neat and clean, not sloppy from loose material. I can even have two pillows stacked and somehow despite being a smooth material, the pillows dont just slide off each other.
The cooling aspect works by not trapping heat, not allowing heat to get to the pillow and hold it there. So yeh, the pillow case will feel warm eventually but if you have a fan, or AC, or flip the pillow, then it is is truly cool. Otherwise in my experience when I use a pillow without this, the pillow just gets hot, stays hot, and even with flipping it feels hot.. because the pillow itself has trapped the heat for remainder of night. Yuck.
One thing to know and this is very important-- as I learned the hard way-- DO NOT DRY IN DRYER. DO NOT WASH IN HOT WATER. Heat will destroy the material ability to feel and stay cool. Do you want a regular heat trapping pillow case? Then go ahead and dry these in the dryer a few times and you will have a regular pillow case. HOw do I know? I bought these to replace another set (different brand, same idea, same instructions that I failed to remember). I always dried them in the dryer, and one night after having gloriously cool pillows, I noticed that my pillow was HOT night after night. It was then when looking for another set of pillow cases that I learned that they cant be exposed to heat like that. SO PLEASE, just AIR DRY.
And so, after I got these and put them on my pillows, I had a much better nights rest. I remember thinking that I wasnt waking to rearrange my pillows. They were just comfortable all night long. Sure, I'd love an even colder pillow, but our room is on the warm side. But at least I wasnt noting the hot hot pillows anymore.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 6, 2021
★★★★★ 5
A must try for hot sleepers!
Color: Blue, Size: Queen (U.S. Standard), Set name: Silky, Color: Blue, Size: Queen (U.S. Standard), Set name: Silky
If you are a hot sleeper these pillowcases are for you! Not only are they silky and beautiful, but they are cool to the touch!The Arc-Chill fabric absorbs heat and instantly cools your skin! If you are prone to insomnia, night sweats, give these a try! They come in a 2 pack and have a few different colors to try out. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Freezing !
Color: Gray, Size: Queen (U.S. Standard), Set name: Stretchy and Soft
### Product Review: Avolare 2 Pack Cooling Pillow Cases
#### Overview
The Avolare 2 Pack Cooling Pillow Cases are designed to provide a cooler and more comfortable sleeping experience, especially for hot sleepers. Made with Arc-Chill fabric, these pillowcases promise to offer a cooling effect, protect hair and skin, and add a touch of luxury with their soft and silky texture. The pillowcases come in a standard gray color, suitable for standard and queen-size pillows.
#### Material and Design
**Rating: ★★★★★**
The Avolare Cooling Pillow Cases are crafted from Arc-Chill fabric, known for its high Q-max value (>0.5), indicating excellent cooling properties. The material feels incredibly soft and silky to the touch, providing a luxurious feel that enhances sleep quality. The gray color is neutral and versatile, fitting seamlessly with various bedding styles.
The design includes a hidden zipper, ensuring that the pillowcase stays securely on the pillow while maintaining a smooth and sleek appearance. The zipper is discreet and doesn’t interfere with comfort, which is a thoughtful addition to the overall design.
#### Cooling Effect
**Rating: ★★★★★**
One of the standout features of these pillowcases is their cooling effect. The Arc-Chill fabric effectively wicks away heat and moisture, making them ideal for hot sleepers or those living in warmer climates. Users have reported a noticeable difference in temperature, which contributes to a more restful and comfortable night’s sleep. This cooling property is particularly beneficial during the summer months or for individuals who tend to overheat while sleeping.
#### Hair and Skin Benefits
**Rating: ★★★★☆**
In addition to their cooling properties, the Avolare pillowcases are also beneficial for hair and skin. The smooth and silky texture reduces friction, helping to prevent hair breakage and skin irritation. This can be particularly advantageous for individuals with sensitive skin or those prone to hair damage. While the pillowcases are not a cure-all for skin and hair issues, they do contribute positively by creating a gentler surface.
#### Durability and Care
**Rating: ★★★★☆**
The Avolare Cooling Pillow Cases are easy to care for, maintaining their cooling properties and softness even after multiple washes. They are machine washable, which adds to their convenience. However, it is recommended to follow the care instructions carefully to ensure the longevity of the cooling effect and fabric quality.
#### Versatility
**Rating: ★★★★☆**
These pillowcases are designed to fit both standard and queen-size pillows, adding to their versatility. They are perfect for use in any bedroom setting, from master bedrooms to guest rooms, and can be paired with various pillow types and fillings.
#### Pros and Cons
**Pros:**
- Excellent cooling properties ideal for hot sleepers.
- Soft and silky texture is gentle on hair and skin.
- Hidden zipper design for a secure fit.
- Machine washable and easy to care for.
- Versatile fit for standard and queen-size pillows.
**Cons:**
- Cooling effect may diminish slightly with frequent washing.
- Limited color options (only available in gray).
#### Final Verdict
**Overall Rating: ★★★★☆**
The Avolare 2 Pack Cooling Pillow Cases are an excellent choice for anyone looking to enhance their sleeping experience, particularly hot sleepers. The cooling properties of the Arc-Chill fabric, combined with the soft and silky texture, provide a comfortable and luxurious feel. The hidden zipper design adds practicality without sacrificing aesthetics.
While there are minor drawbacks, such as potential diminishing of the cooling effect with frequent washing and limited color options, the overall benefits make these pillowcases a worthwhile investment. If you’re seeking to improve your sleep quality and enjoy a cooler, more comfortable night’s rest, the Avolare Cooling Pillow Cases are definitely worth considering.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2024